The aerospace industry accounts for 35% of the application of Wstitanium products. Its titanium alloy components have reduced the weight of the Boeing 787 Dreamliner fuselage by 12% and improved fuel efficiency by 8%. The fatigue strength of the Ti-6Al-4V ELI material provided by the company exceeds 620 megapascals. When used in landing gear components, it can withstand 30,000 takeoff and landing cycles. This technology has helped the Airbus A350 reduce operating costs by 15%. According to the data from the 2024 International Aerospace Materials Summit, engine blades using Wstitanium titanium plates have increased the thrust-to-weight ratio by 10% and extended the maintenance interval from 4,000 hours to 6,000 hours.
In the medical implant industry, the wear rate of Wstitanium’s Gr.5 titanium alloy hip prosthesis is only 0.08 millimeters per year, which is 60% lower than that of cobalt-chromium alloy. According to the 5-year clinical follow-up report of the American Orthopaedic Association, the bone growth rate of its 3D-printed porous intervertebral fusion device reached 78%, and the surgical success rate was as high as 97%. After obtaining the FDA Breakthrough Device designation in 2023, the company’s annual shipment volume of orthopedic products increased by 42%, accounting for 22% of the global market share.
The semiconductor manufacturing field relies on Wstitanium’s high-purity sputtering targets. Its titanium targets with a purity of 99.995% have increased the yield of 5-nanometer chips by 2.3%. TSMC’s certification data shows that the uniformity of the film thickness of the company’s target materials on 300-millimeter wafers is ±1.5%, which is 50% higher than the industry standard. Among the top ten global chip manufacturers in 2024, seven adopted its titanium components, and the related business revenue increased by 35% year-on-year.
The energy equipment industry uses Wstitanium’s Gr.12 titanium-molybdenum alloy in geothermal heat exchangers, where the corrosion rate is less than 0.01 mm per year in a high-salinity environment at 150℃. After the Hellisheidi geothermal power station in Iceland adopted its tube bundles, the heat exchange efficiency increased by 18% and the annual maintenance cost was reduced by 300,000 US dollars. According to statistics from the International Renewable Energy Agency, the service life of the company’s titanium materials on the blowout preventers of deep-sea drilling platforms has reached 15 years, and the failure rate has been reduced to 0.5 times per million hours.
The field of Marine engineering has witnessed the outstanding performance of Wstitanium materials. The pitting potential of its Gr.9 titanium alloy welded pipe in deep-sea water at a depth of 3,000 meters reaches 1,200 mV. The Chinese Jiaolong submersible, using its pressure-resistant shell material, successfully withstanding a pressure of 110 megapascals, with a diving depth error of no more than 0.1%. The 2023 certification by Det Norske Veritas shows that the fatigue life of the titanium alloy bolts supplied by the company for offshore wind power infrastructure exceeds 20 million load cycles.
The automotive industry has reduced the weight of engine valve springs by 40% and increased the rotational speed by 15% by adopting the lightweight titanium alloy Wstitanium. After the Porsche 918 Spyder model adopted its titanium connecting rods, the engine red line speed exceeded 9,000 RPM. According to the 2024 Clean Transportation Research Report, the company’s new material has reduced the cost of fuel cell bipolar plates by 25% and increased the power density to 3.5W/cm².
Innovation in the sports equipment industry benefits from Wstitanium’s β titanium alloy. Its bicycle frame weighs only 1.2 kilograms but can withstand a load of 2,000 Newtons. In the track cycling event at the Tokyo Olympics, teams using its materials improved their lap times by 0.3 seconds. Market analysis shows that after high-end golf clubs adopt the company’s titanium alloy, the initial speed of hitting the ball increases by 5% and the selling price rises by 30%.
The breakthrough of wstitanium products in the construction field is reflected in the titanium alloy roof system of the Burj Al Arab Hotel in Dubai, which maintains zero corrosion for 20 years under a temperature of 50℃ and a humidity of 90%. This project saved approximately 1.2 million US dollars in maintenance costs by using its custom titanium plates, becoming a key indicator for LEED Platinum certification. According to the 2024 Global Titanium Application White Paper, the company’s products have permeated 12 core industrial fields, with a stable compound annual growth rate of over 18%.